Synchronous machines used in wind turbines typically use rare earth permanent magnets (PMs) due to the possibility of high power densities and efficiencies. However, alternative non-PM topologies are gaining popularity due to the cost and supply volatility of PMs. Wound-field flux-switching machines (WFFSMs), although boasting high torque densities and being PM-free, have lower power densities than PM machines. However, a doublestator wound-field flux-switching machine (DSWFFSM) exemplifies even greater power density. This study investigates the application of DSWFFSMs for direct-drive wind applications. Furthermore, the performance of an optimized 3 MW DSWFFSM design is compared with a single-stator WFFSM design. Both designs are based on the volume of a single-stator PM flux-switching machine from the literature. Although the torque per weight for the DSWFFSM and the single-stator WFFSM are similar, the torque per volume for the DSWFFSM is shown to be significantly exceptional. The torque ripple in the DSWFFSM is also smaller, but the efficiency is slightly lower than the single-stator WFFSM. The DSWFFSM design, which is shown to be comparable to PM-based topologies in terms of power density, highlights a low-cost, sustainable, clean energy generator topology.
Loading....